<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>Netemu 虚拟化先锋  - Gns3</title>
    <link>http://www.netemu.cn/bbs/forumdisplay.php?fid=226</link>
    <description>Latest 20 threads of Gns3</description>
    <copyright>Copyright(C) Netemu 虚拟化先锋 </copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Fri, 18 May 2012 17:03:28 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.netemu.cn/bbs/images/logo.gif</url>
      <title>Netemu 虚拟化先锋 </title>
      <link>http://www.netemu.cn/bbs/</link>
    </image>
    <item>
      <title>如何将GNS3中的虚拟路由器两个接口相连</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15507</link>
      <description><![CDATA[我想通过一台物理设备Tester连接安装到PC中的GNS3虚拟路由器的两个以太网接口。如下图所示，请问如何配置，Tester有两个物理接口，需要跟GNS3的路由器两个以太网接口相连。谢谢~
data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAQIAAAD4CAIAAACIU3/MAAAJlklEQVR4nO3cW3LrOA ...]]></description>
      <category>Gns3</category>
      <author>bruce706</author>
      <pubDate>Fri, 27 Apr 2012 06:28:34 +0000</pubDate>
    </item>
    <item>
      <title>win 8下不能桥接本地网卡求解决方案</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15415</link>
      <description><![CDATA[file:///C:/Users/admin/Desktop/1.png[/img]]]></description>
      <category>Gns3</category>
      <author>safescan</author>
      <pubDate>Wed, 28 Mar 2012 03:52:43 +0000</pubDate>
    </item>
    <item>
      <title>GNS3</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15362</link>
      <description><![CDATA[今天突然想起用cisco 连接 juniper router 以太网配好竟然可以ping通
还没有做其他的测试 比如tunnel ,或者IGP BGP什么的。 
至少开个好头{:2_103:}]]></description>
      <category>Gns3</category>
      <author>zoom123</author>
      <pubDate>Thu, 08 Mar 2012 13:10:03 +0000</pubDate>
    </item>
    <item>
      <title>windows 2008 X64下gns3模拟交换机</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15333</link>
      <description><![CDATA[在gns3 里模拟的交换机都只能模拟3快速以太口，3640 3620 3725 3745 都尝试了  都没有，准备搭建一个sec  lab  模拟实验机架，那个大神在帮助我 ，在线急等！！！！！！！！！！！！]]></description>
      <category>Gns3</category>
      <author>ccie1190</author>
      <pubDate>Sun, 26 Feb 2012 12:36:50 +0000</pubDate>
    </item>
    <item>
      <title>GNS3和物理交换机搭建CCIE实验</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15266</link>
      <description><![CDATA[[i=s] 本帖最后由 faerl 于 2012-2-12 17:42 编辑 [/i]

各位：

      帮我看看我选得设备可以满足CCIE-RS的考试要求吗？最近要买这几个交换机用作实验环境，和GNS3路由一起



[size=4][color=red]CISCO WS-C3560V2-24TS-S [color=black]4台[/color]

CISCO WS-C37 ...]]></description>
      <category>Gns3</category>
      <author>faerl</author>
      <pubDate>Sun, 12 Feb 2012 09:40:57 +0000</pubDate>
    </item>
    <item>
      <title>GNS3完美教程</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15173</link>
      <description><![CDATA[[i=s] 本帖最后由 tq_nete 于 2011-12-29 12:19 编辑 [/i]

在网上闲逛,发现一个号称&quot;&quot;GNS3完美教程&quot;&quot;的东东,看了下,还可以,不敢独享,拿出来一起分享..
[size=5][color=#ff0000][/color][/size]
http://www.ouliu.net/p/154300069061b11202969f8b7b97c16a.jpg[/img][/free] ...]]></description>
      <category>Gns3</category>
      <author>tq_nete</author>
      <pubDate>Thu, 29 Dec 2011 01:11:37 +0000</pubDate>
    </item>
    <item>
      <title>gns3 0.7.4/0.8.2 输出非常慢，如何解决？</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15151</link>
      <description><![CDATA[发现gns3 0.7.4 输出信息非常慢，show run的时候都是逐行显示的，特别是打？的时候，这个有什么方法可以解决吗？只能是替dynamips 0.2.8 rc2 吗？]]></description>
      <category>Gns3</category>
      <author>caogyy</author>
      <pubDate>Wed, 21 Dec 2011 06:01:32 +0000</pubDate>
    </item>
    <item>
      <title>GNS3最新版本GNS3-0.8.2-BETA-all-in-one</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15143</link>
      <description><![CDATA[[i=s] 本帖最后由 H.T 于 2011-12-20 06:13 编辑 [/i]

[align=left][font=verdana, arial, sans-serif][size=13px]    It brings the official support of the new features introduced in GNS3 0.8.1 VBE (VirtualBox Edition) and also a significant change from both 0. ...]]></description>
      <category>Gns3</category>
      <author>H.T</author>
      <pubDate>Mon, 19 Dec 2011 22:12:19 +0000</pubDate>
    </item>
    <item>
      <title>GNS3和物理交换机 – Breakout Switch</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15128</link>
      <description><![CDATA[[i=s] 本帖最后由 faerl 于 2011-12-13 14:40 编辑 [/i]

各位：       有没有在windows 7 下网卡支持Trunk的方法
下面是Linux平台的实现，大家看看有没有成功的

USING 802.1q, QnQ AND A BREAKOUT SWITCH[url=http://blog.ipexpert.com/2011/02/28/gns3-and-physical-sw ...]]></description>
      <category>Gns3</category>
      <author>faerl</author>
      <pubDate>Tue, 13 Dec 2011 06:30:26 +0000</pubDate>
    </item>
    <item>
      <title>GNS3 VBOX 0.8.1版本问题</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=15020</link>
      <description><![CDATA[点 edit --  preferences... 出现如下错误：

[color=#000000]Dynagen management console for Dynamips (adapted for GNS3)[/color]
[color=#000000]Copyright (c) 2006-2011 GNS3 Project[/color]

[color=#000000]=&gt; ---------Traceback lines (saved in exception.l ...]]></description>
      <category>Gns3</category>
      <author>ewangsoft</author>
      <pubDate>Wed, 16 Nov 2011 06:16:53 +0000</pubDate>
    </item>
    <item>
      <title>GNS3直连端口无法ping通，debug显示封装失败，求助！！！</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14909</link>
      <description><![CDATA[[size=5][color=#000000]GNS3直连端口无法ping通，debug显示封装失败，求助！！！几天都在看IE视频，看完了准备敲敲实验，结果发现怎么开模拟器都无法ping通直连口。我一气之下卸载了GNS3，我的是最新版0.7.4。然后我再安装，问题依旧没有解决。我debug看到是封装失败，群里有 ...]]></description>
      <category>Gns3</category>
      <author>wly0735</author>
      <pubDate>Tue, 25 Oct 2011 16:37:29 +0000</pubDate>
    </item>
    <item>
      <title>解决一个CentOS下运行GNS3的小问题</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14907</link>
      <description><![CDATA[今天运行GNS3时，出现如下错误：
Traceback (most recent call last):
  File &quot;gns3.pyw&quot;, line 29, in 
    from PyQt4 import QtCore, QtGui
RuntimeError: the sip module implements API v8.0 to v8.1 but the PyQt4.QtCore module requires API v6.0

昨天都还运行 ...]]></description>
      <category>Gns3</category>
      <author>qxrftz</author>
      <pubDate>Tue, 25 Oct 2011 06:02:51 +0000</pubDate>
    </item>
    <item>
      <title>关于GNS3 VBOX版本，VBOX主机和CISCO 3600交换模块相连的问题</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14854</link>
      <description><![CDATA[VBOX主机里运行的是ROS，使用VLAN子接口了，ROS和加装了交换模块的3600相连，相连端口为trunk模式。3600的一个端口（vlan 10 access端口）和另外一个VBOX主机A相连。
现在在ROS的WAN下创建VLAN 10，配置VLAN 10的IP和A主机的IP一个网段，发现两者不能通。
是不支持，还是我 ...]]></description>
      <category>Gns3</category>
      <author>ewangsoft</author>
      <pubDate>Mon, 10 Oct 2011 02:02:01 +0000</pubDate>
    </item>
    <item>
      <title>运行GNS3出现Unable to activate JIT sharing group错误</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14816</link>
      <description><![CDATA[我用gns3搭建好拓扑后，运行路由器，出现这个错误，[color=#000000]Unable to activate JIT sharing group, please consider deactivating JIT sharing，请问一下怎么解决，谢谢[/color]]]></description>
      <category>Gns3</category>
      <author>apls</author>
      <pubDate>Sun, 25 Sep 2011 11:50:46 +0000</pubDate>
    </item>
    <item>
      <title>GNS3的问题，各位大虾帮忙看下</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14772</link>
      <description><![CDATA[[font=Tahoma,]有谁知道GNS3出现这样的情况是怎么回事吗
点击路由器，就什么反应也没有了。
大家帮忙看下。。。。。。。。。。。。。。。。。。。。。。。。。。。10099[/attach][/font]]]></description>
      <category>Gns3</category>
      <author>xieshengyin</author>
      <pubDate>Thu, 08 Sep 2011 07:49:20 +0000</pubDate>
    </item>
    <item>
      <title>【下载视频】GNS3模拟PIX、ASA、IPS、Juniper的所有模拟操作过程</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14701</link>
      <description><![CDATA[小弟研究出来后绝对不敢独自享用，分享给各位在一线一起艰苦奋斗的战友。小弟把自己的PPT也贡献给大家。还有，小弟的普通话说得很垃圾，希望各位大哥、大姐、叔叔、伯伯谅解。 

http://u.115.com/file/dncoanw0
#GNS3模拟PIX.rar
http://u.115.com/file/dncoa8mj
#GNS3 ...]]></description>
      <category>Gns3</category>
      <author>花开花落花无情</author>
      <pubDate>Sun, 14 Aug 2011 07:04:45 +0000</pubDate>
    </item>
    <item>
      <title>gns 7.4</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14622</link>
      <description><![CDATA[怎么模拟ASA8.04]]></description>
      <category>Gns3</category>
      <author>ccie1190</author>
      <pubDate>Thu, 21 Jul 2011 13:26:45 +0000</pubDate>
    </item>
    <item>
      <title>关于7.4的问题</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14320</link>
      <description><![CDATA[我模拟5路由,2交换5路由前4台是同一个server,后一台独立一个(gns自己分配的)
哪怕我慢慢开,慢慢配置,前四台路由还是会挂掉
我试过把dynamips的所有特性都取消,再重新写net
问题依旧,把每个server的内存设到2048也是挂

请教一下,我个人感觉一个设备起一个server,应该不会 ...]]></description>
      <category>Gns3</category>
      <author>dmifly</author>
      <pubDate>Fri, 29 Apr 2011 10:11:40 +0000</pubDate>
    </item>
    <item>
      <title>GNS3 0.7.4 &amp;amp; Dynamips 0.2.8RC3 community release</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14275</link>
      <description><![CDATA[GNS3 0.7.4 is released. This is a minor release before working on a major one and includes the following things:
[*]Greek translation[*]Hypervisor allocation per IOS type[*]Improvements on Ethernet Switch (dynamic remapping of VLAN or type)[*]Adaptations]]></description>
      <category>Gns3</category>
      <author>锅巴粥</author>
      <pubDate>Tue, 12 Apr 2011 10:41:03 +0000</pubDate>
    </item>
    <item>
      <title>Gns3模拟ASA 不能直连VPC，不能直连Vmware？</title>
      <link>http://www.netemu.cn/bbs/viewthread.php?tid=14199</link>
      <description><![CDATA[Gns3不能直接连VPC和VMWARE么？这个问题怎么去解决呢？]]></description>
      <category>Gns3</category>
      <author>xiaomutou5688</author>
      <pubDate>Mon, 21 Mar 2011 00:52:18 +0000</pubDate>
    </item>
  </channel>
</rss>
